WiFi-106 Multizone Controller

WiFi Controller with Multi-Zone capability.

The WiFi controller uses 2.4GHz radio frequency for incoming and outgoing communication. It can be used in four different modes: dimming, colour temperature adjusting, RGB and RGBW.

The WiFi-106 controller can control up to 12 zones of lighting. The controller itself can connect directly to LED Strip or ‘F4’ zone receivers are used for multi zone requirements.

There are two ways of connecting with the WiFi-106 controller, either directly or through a network router. The WiFi-106 has its own WiFi network that a smart device (phone, pad etc.) can connect with. However it’s usually best to connect the WiFi-106 to a WiFi network. This lets any device connected to the network control the WiFi-106. Multiple WiFi-106 controllers can be connected to the router allowing multiple sets of up to 12 zones of lighting per controller.

The WiFi-106 can also be used as a master controller in the new “LT-BUS” commercial lighting control system, allowing the app to control a huge range of LTECH products. It’s also fitted with timing function; lights can be automated according to the time of day and day of the week.

An app is needed on each smart device used to control the lighting. The app is free and available in IOS and Android format.

Included with the WiFi-106 controller is a simple remote control. This primarily allows the switching on or off of individual zones and the recall of your favourite lighting scenes, useful if a smart device isn’t to hand.